| Customization: | Available |
|---|---|
| Type: | Stretch Blow Molding Machine |
| Raw Material: | PET |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2021 New Preform Automatic Loading Semi Auto Pet Bottle Blowing Machine
Final Products
|
Capacity (500ml Bottle):1000BPH~20000BPH Suitable Bottle Shapes: PET circular or square Bottle diameter(mm):φ50-115mm Bottle height (mm):160-320mm |
Product introduction
2021 New Preform Automatic Loading Semi Auto Pet Bottle Blowing Machine
- Machine use of advanced PLC control system,stable in performance, automatic preform feeding.
- Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
- High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the - High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
- No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
- Air route design is divide into two parts
- Ideal effect of the chilling with the chilling system
- Low rejection rate: less than 0.3percent
Parameter list
| Output | up to bottle shape | 800~1200bph | Power | power voltage | 3Phase 380V/ 50HZ |
| Finished Bottle |
bottle body diameter | 30mm-130mm | installed power / actual power | 18kw/10kw | |
| bottle height | 50mm-350mm | Air Source | high pressure air compressor | 1.2m3/min 3.0MPa | |
| bottle neck diameter | 15mm-120mm | air dryer | 2.0m3/min 3.0MPa | ||
| Mold | cavity | 2cavity | Cooling Water | water yield | 15L/min |
| mold thickness | 100~250mm | Blower Dimension | length*width*height/ weight | 1650*650*1750mm/650kg | |
| Max. stretching distance | 430*380mm | Heater Dimension | length*width*height/ weight | 1850*670*1650mm/350kg |
Zhangjiagang Sokos Machinery Co., Ltd. is located in Zhangjiagang City, Jiangsu Province, China, and is one of the professional manufacturers with more than 25 years of experience in this field.
Sokos Machinery has a modern workshop of 5,000 square meters by our QC team, and each equipment that leaves the factory will be debugged and inspected by a number of experienced engineers.
In order to give customers a better experience, we are equipped with an independent technology research and development department.. The high-precision filling nozzle and the latest constant torque capping device are developed from this.
We provide customers with:water, juice, tea beverages, carbonated beverages, beer and other liquid filling lines. Our production lines have been installed in more than 56 countries.
"Quality, Integrity" is the foundation of Sokos's existence. Sokos is well received by the majority of users. The company has established a solid position in the industry.
Sokos provides beverage filling solution, and warmly welcomes people from all walks of life to visit our company for inspection and guidance. Achieve win-win cooperation!
Invention patent
Our R&D team has been constantly innovating in the research and development of beverage machinery accessories, focusing on providing customers with a better experience.
Certificates.
We have been producing our goods with mature technique and first-class quality. Our products are not only marketed inland, but also exported to all over the world, Such as: Africa, Mid East, South Asia, South America.
We believetruthfulness,conscientiousness, enterprising spirit, continuous improvement and creativeness in running business, which helps our finest products enter the market.
Our Manufacturer Factory.
At present, we manufacture and provide the following lines to our customers:Beverage Filling Complete Line,water treatment plants,water filling machine,beverage filling machine,beverage preparation system,packages equipment coding machine,labeling machine,PE Film Shrink Wrapping Machine,Injection machine,Blow Molding Machine.We welcome distributors and factory owners from around the world to cooperate with us and look forward to receiving your inquiries in the near future.
|
|
|
|
Professional engineer team Have 10+ years'experience |
Factory inspection Control the quality of products |
Our Customer
FAQ
Q: Are you a manufacturer or a trading company?
A: We are the source factory with 25 years' manufacturing experience in beverage machinery. Located in Jinfeng Town, Zhangjiagang City, Jiangsu Province, China. The transportation is convenient, very close to Pudong Airport and Sunan Shuofang Airport. If your itinerary includes a factory visit, we will pick you up.
Q: How long is your delivery cycle after you order the machinery?
A: Generally it is 40 working days.
Q: Do you have a relevant after-sales system?
A: We have a Perfect after-sales system.
1: 12 months warranty.
2: Many-to-one service,we will solve basic problems through telephone and video calls. The operating manual will be sent with the machine or via email.
3: If conditions permit, the engineer will go to the buyer's factory to install and test the machine, and train the buyer's staff on how to operate and maintain the machine.
Q: If I want to buy a machine, what information do I need to tell you?
1: What liquid do you want to fill?
2: What is the capacity and height of the bottle?
3: What is the output in one hour?
4: Related water quality analysis reports, etc.
5: Required mechanical voltage
Q:How do you ensure the quality of the machine?
1:To ensure the accuracy of parts. We are equipped with a variety of professional processing equipment, plus professional processing methods accumulated over the years.
2:Before the machine is assembled, each part is inspected by the inspector.
3:Assemble machines, all with masters with more than 5 years of work experience to operate.
4:After all the equipment is completed, we will connect all the machines and allow at least 12 hours for a complete production line. To test its stability
Our Product
|
Product List |
Capacity (B/h;C/h) |
Package Type |
|
Bottled water line |
2000-30000 |
PET /Glass bottle |
|
5 gallon filling line |
2000-3000 |
PC barrel |
|
Carbonated drinks line |
2000-30000 |
PET /Glass bottle |
|
Juice production line |
2000-30000 |
PET /Glass bottle,can |
|
|
2000-10000 |
Paper box |
|
Wine/sauce/oil/milk/alcoholic drinks line |
2000-30000 |
PET /Glass bottle |
Thanks for your time to scan our website!
){kind=link}